Live Help

Live Help

live oak low water pressure

Very Low Water Pressure in Live Oak, CA

Lower Water Pressure Live Oak, CA

If you ever begin to notice a reduction of water pressure, the trouble are often times within your plumbing system. Below are a few of the prevalent factors to consider whenever trouble shooting a low water pressure situation.

Obstructed Aerators

When the decreased water pressure is originating from a certain faucet, the challenge could simply be a stopped up or congested aerator. Remove the faucet, and examine the aerator screen for oxidation, particles, scale or any other contaminants which might be constraining steady flow. At times it could be much easier to basically clean up or swap the aerator entirely.

No Hot Water Pressure

If the low water pressure generally seems to fundamentally be having an effect on hot water, there can be problems with the hot water heater. Check the shut off valve around the water heater, ensuring that it’s fully open. You might need to check with a professional plumbing service to examine the health of your hot water heater and see if this is affecting your low water pressure.

PRV (Pressure Reduction Valve)

Whenever the low pressure issue is found all through the home, you should examine your PRV. This could be a bell-shaped mechanism, and is quite often located where the line enters a house. If the PRV is poorly adjusted or fails, it can cause a pressure loss, or maybe even no water to your house.

Shut off Valves

The majority of households and companies have a primary shut off valve. The location can vary, however, most of the time it will be discovered in a different box right behind the water meter or next to the PRV. This kind of valve, which lets you shut off the water flow to your home, can minimize the steady flow if it isn’t wholly open. Even if slightly closed, this valve can constrain flows and decrease your water pressure.

Mineral Deposits

For even older buildings, water lines such as galvanized water pipes are often found. With time, mineral deposit buildup can take shape within the water pipe and thereby minimize the internal size within the water line, and also causing the inner components of the pipe rough. Even though this decay doesn’t create a health hazard, this tends to restrict your steady flow and water pressure. For those who discover this to be a problem, your only solution is to replace the plumbing in your house utilizing PEX or copper repipe.

Demands on Your Water System

If the pressure seems to be considerably lower at certain times throughout the day, you could be discovering the result of peaking demand of the water system. One can find generally not one but two peak periods of time during the day. An example may be first thing each morning when you are getting ready to go to work or school. Another is the evening when most people are coming back home from working. During this time they are quite often washing clothes, taking a shower, or watering their lawn. Within these times, you might notice a decrease in pressure, however, you should have enough water so long as you do not also have one of the several factors outlined in one of the other troubleshooting procedures.